Hardware Japanese Screw Punch
This Japanese punch cutting tool is able to make particularly clean holes due to its drilling action. Suitable for leather, plastic and cardboard. Hardened, replaceable punch heads, brass shaft, beech handle.
5 heads, 1.5, 2.5, 3, 3.5 and 4 mm.
detailsLeather Drill Punch: $95.50 ($86.82)Eyelet Setters
3 pack for three popular sizes: 4.8mm, 3.2mm and 1.6mm
Hole punch end - sets eyelet in a snap
Built in spring hammer - spring action power creates
enough force to punch through heavy card, cloth and split eyelets
picture and detailsPack of three sizes: $22.90 ($20.82)Wood Burning Tool
With seven interchangeable brass tips, this tool is highly suitable for burning polyester fabrics and kunin felt edges, as well as wood. Indispensible for the experimental textile artist.
picturesWood Burning Tool: $30.00 ($27.27)Heat Gun
This Milwaukee Precision Hot Tool can be used with embossing powders, tyvek and xpandaprint, and for distressing and distorting. The textile artist's necessary equipment piece. (It's even designed to strip paint from hard to get areas, but you wouldn't want to do THAT with it - would you!)
Please note - this is a 250 volt 50 Hz appliance. Adaptors will be needed in countries with different supply systems.
picturePrecision Heat Gun: $65.00 ($59.09)Clover Mini Iron
This mini iron enables the user to press very small pieces and seams with a minimum of pressure. Light and comfortable to use.
Ideal for making bias tape, and fusible bias tape, eg for celtic and stained glass appliqué and other handcrafts using tapes. Also ironing experimental stuff including foils, cellophane etc.
The version that we sell is compatable with Australian and New Zealand electricity supply systems.
Comes with full instructions
picturesPrice: $49.90 ($45.36)Ranger Melting Pot
This melting pot enables you to safely and easily:
Heat and Melt; UTEE, embossing powders, candlewax, crayons, soap, hot glue and other meltable craft materials
Dip and Coat; wood, shrink plastic, Melt Art Shapes, wire, glass, metal etc
Pour into Moulds; to create fashion jewelry, candles, designer soap etc.
Features:
* Optimum temperature control
(set temperatures accurately 40C - 170C)
* Rapid, even melting of many craft mediums
* Elongated spout for accurate pouring
* Non stick surface for easy cleaning
pictures and detailsMelting Pot: $75.00 ($68.18)Microfleur Flower Press
Microfleur has been developed for pressing and drying flowers in a microwave oven. This is a very quick process which produces superior colour results.
Comes with full instructions.
picture and detailsSingle press: $28.00 ($25.45)Paper Crimper
Not just for paper, but wonderful for crimping metal shims.
Customers; we are out of stock, and at present, unable to resource.
picturePaper / Shim crimper: $44.00 ($40.00)Embroidery Frames
These little metal frames are great for wrapping threads, wool, ribbon, fabric scraps, beads etc around and stitching over to create a new piece of fabric which you can use in so many ways. Uses include edgings, belts, little bags insertions in garments, tassel making etc. Each frame comes with an informative suggestion sheet.
Sizes: 15cm x 15cm, 20cm x 8cm, 10cm x 10cm,
5cm x 5cm, 7.5cm x 7.5cm, 18cm x 13cm.Individual frames: $4.00 ($3.64)Bits and Bobs
We have a few only of each of these:
Wonder Knitter, Rubber Paint Comb and Wooden Knitting Needles.
detailsWonder Knitter: $14.00 ($12.73)
Rubber Paint Comb 3 side: $5.50 ($5.00)
Rubber Paint Comb Multi: $6.80 ($6.18)
Wooden Knitting Needles: $19.90 ($18.09)