Jacquard Acid Dye Instructions Stove Top Immersion Dyeing with Jacquard Acid Dyes Fill a stainless steel or enamel pot with just enough hot or warm water for the fabric to swim freely, turn on the heat. Add the dye powder to the pot and stir. Normally, in this procedure you would add 2 to 4% of the dry weight of the fabric in dye powder. For example, if you are dyeing 1 pound of fabric, use 1/3 to 2/3 of an ounce of dye. Add the fabric that has been thoroughly wetted to the dyepot. Raise the temperature to 185 to 200 degrees, just below boiling. Stir frequently. Add ¼ cup of vinegar per pound of fabric. Try not to pour directly onto the fabric. Maintain temperature and stir frequently for ½ hour. Wash in Synthrapol and warm water. Note: If you are dyeing wool, a gradual heating and gradual cooling of the dyebath is important so as not to shock and felt the wool. to screenprinting, stamping and painting instructions to flowable painting instructions to washing machine instructions back to Jacquard Products